Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Beverly Hills
If your fireplace is smoking into the room on the first cold night, or you’ve spotted a cracked crown on the chimney you haven’t looked at in years, we’re the crew to call here in Beverly Hills. This pocket of south Waco has its own rhythm. The houses are older, the fireplaces sit idle through most of the year, and the damage that builds up is quiet until the first freeze. We know how chimneys in this town age. We specialize in chimney repair for exactly the kind of mid-century masonry found throughout Beverly Hills, not the new-build fireplaces across the rest of the metro. Call (866) 370-3896 to book a visit. Our technicians have up to 14 years of experience. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Chimney Sweep Waco for Chimney Repair
Chimney work in Beverly Hills is different from the rest of the Waco metro. This older enclave, wedged between Waco and its industrial south side, is largely mid-century and older single-story frame and brick homes. Many still have original masonry fireplaces with clay flue tile that has gone years without real upkeep. That is our lane. We work with professional-grade materials, not big-box substitutes, and we explain what we’re doing and why before we do it. Homeowners in Beverly Hills call us because they want a straight answer, not a sales pitch.
We can work with your insurer on inspection documentation, and we don’t recommend a dollar of repair without camera evidence you can see for yourself. When something can safely wait until next season, we say so. We keep our service area tight so we can get to Beverly Hills quickly. Need a free written estimate? Call (866) 370-3896. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Beverly Hills
Chimney Flashing Repair in Beverly Hills comes up often on the older roofs where the metal where the chimney meets the shingles has pulled loose or rusted through. When flashing fails, water runs down the outside of the flue and works into the attic or ceiling below. It’s one of those problems that hides until it doesn’t. We replace or reset the flashing with proper step and counter-flashing, sealed with materials built to last between visits, not just patched for the day. Typical flashing repair on a Beverly Hills home runs $300 to $800, depending on access and how much roof the flashing job touches.
Where Flashing Fails First
The bottom edge against the shingles is usually first to let go. Sun bakes the sealant, thermal cycling pulls it back, and the first hard summer storm finds the gap. On a mid-century roof, the flashing at the crown line often goes the same way.
When to Stop Water Before It Spreads
If you’ve seen a brown stain on a ceiling near the chimney, that’s the signal. Flashing repair done early is a fraction of the cost of fixing the interior. We check the whole flashing line on every repair visit and tell you exactly what we find.
Chimney Crown Repair in Beverly Hills
Chimney Crown Repair in Beverly Hills is one of the jobs we see most often, because the crown on an original masonry chimney here takes a beating from Central Texas heat and summer storms. A crown is the concrete cap on top of the chimney. When it cracks or settles, rain runs into the smoke chamber and down the flue, and that moisture is what spalls the brick and eats the mortar over years. We rebuild or resurface the crown with a proper slope and seal. Typical crown repair runs $400 to $1,200 depending on size and whether the crown needs a full rebuild or resurfacing.
What a Cracked Crown Looks Like
Hairline cracks that look harmless can let water in with every storm. A settled crown pulls away from the flue tile at the top. From the ground, this often shows up as a dark ring or a gap where the cap sits.
Why the Crown Protects the Whole Chimney
The crown is the roof of the chimney. Everything below depends on it. Getting the crown solid is the first step before any flue or firebox work makes sense, and it is one of the few repairs that clearly pays for itself over time.
Trusted Brands We Service in Beverly Hills
We work with a defined roster of professional-grade brands because the products behind a repair matter as much as the labor. That means HeatShield for flue resurfacing and ceramic repair, DuraFlex for full relining jobs, and Copperfield and Famco for chimney caps, covers, and venting components. We don’t source generic substitutes. We don’t source big-box parts. The products we install are the same trade-level lines full-time chimney contractors rely on nationwide. That means we know how they work, we know how they hold up, and we can move on a repair without waiting on a special order that never arrives right. When your Beverly Hills chimney needs work, it gets built to last between visits, not just cleaned for the day.
Common Chimney Repair Problems We See in Beverly Hills Homes
- Cracked or settled chimney crowns. On an original masonry chimney, the crown is often decades old and has taken years of heat cycles. Once a crown cracks, summer storm water runs straight into the smoke chamber on a flue that hasn’t been used since last winter.
- Spalling brick and crumbling mortar. Central Texas humidity and heat cycles work on mid-century chimneys steadily. Brick faces pop and mortar joints crumble at the crown and flashing lines where the water hits hardest.
- Animal nests and leaf debris blocking the flue. Months of no fireplace use leave the flue wide open to whatever finds its way down. The first cold-snap fire then drafts poorly and sends smoke back into the room.
- Water intrusion around caps and flashing. A loose cap or pulled flashing lets water find the roof deck and the ceiling below. It’s common on the older single-story stock throughout this part of south Waco.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Beverly Hills, TX
Chimney repair pricing in Beverly Hills is set per job by a free written estimate, and the estimate is the final price. Typical ranges for the work we do here:
- Chimney crown repair: $400 to $1,200
- Chimney flashing repair: $300 to $800
- Mortar repointing or tuckpointing: $500 to $1,500
- Spalling brick repair: $400 to $1,000 per affected area
- Chimney waterproofing: $350 to $900
- Full chimney rebuild (partial or top-down): $2,500 to $7,500
Those ranges reflect what a job of that scope typically runs in this part of the metro. The written estimate is what you pay. Nothing gets added later. We tell you clearly when a repair can safely wait and when it can’t, and we back every recommendation with camera footage and photos you can review before you decide.
We Also Serve Cities Near Beverly Hills
Our chimney repair team covers Beverly Hills and the surrounding cities of Waco, Bellmead, Woodway, and Hewitt. If you’re in Beverly Hills or the neighboring towns and your chimney needs a look, give us a call. We can typically schedule a visit in the same week. To talk through your chimney repair options, see our chimney repair service page or call us at (866) 370-3896. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Beverly Hills, TX – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Beverly Hills
Yes, especially if it’s been years. A masonry chimney that sits unused still takes moisture, debris, and animal traffic. Central Texas heat and humidity let creosote and moisture consolidate during the off months, and summer storms drive water in around crowns and caps. An inspection catches the deferred-maintenance problems before they become structural. Call (866) 370-3896 for an exact quote – estimates are free.
A Level 1 inspection is a visual check of the readily accessible parts. A Level 2 adds a camera run through the flue and is what you want before any repair or after any change to the system. A Level 3 goes further, opening up parts of the chimney or chase when the problem isn’t visible otherwise. For a repair decision in Beverly Hills, Level 2 with camera is almost always the right call. Call (866) 370-3896 to book one.
You can’t tell by looking from the firebox, and yes, it changes the repair. First-degree creosote is a light soot that sweeps off. Third-degree is glazed and hard, and it needs chemical treatment or in some cases flue resurfacing before the chimney is safe to use. We check creosote level on every visit and tell you plainly what stage it’s at. Call (866) 370-3896 to schedule an inspection.
Yes, if the crack is real and open, it does. A cracked crown lets rain into the smoke chamber and down the flue, and by the time you light the first fire, the damage underneath can be worse than it looks. Crown repair is usually a one-visit job. Getting it done before the first hard freeze is the practical move. Call (866) 370-3896 for a free written estimate.
It means replacing or resetting the metal where the chimney meets the roof, sealing the step flashing and counter-flashing against the shingles so water runs away from the joint instead of under it. Older roofs here often have original flashing that has sat through years of heat and storms. When it pulls back or rusts through, water finds a path into the attic. A flashing repair is a focused job and usually cheaper than the interior damage it prevents. Call (866) 370-3896 – estimates are free.
Book Your Beverly Hills Chimney Repair
If your chimney has gone a few seasons without a look, the right time to fix it is before the first cold snap, not after the smoke starts rolling into the living room. We work with professional-grade materials, back every recommendation with camera footage, and give you a written estimate that holds. Whether it’s a cracked crown, spalling brick, a flashing leak, or a full rebuild, our chimney repair work is done by people who know how these systems behave in Central Texas weather. Call (866) 370-3896 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Waco.