Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Waco, TX
Chimney Inspection in Waco starts with one fact: most of the fireplaces here were built before 1970, and many of them sit idle for months or years between burns. That combination – old masonry, long off-seasons, and a humid subtropical climate with short mild winters – means the work we do in Waco is different from what a sweep does in a colder market. We inspect first, tell you plainly what your flue needs, and only then talk about sweeping or repair. Our technicians have up to 14 years of experience. Call (866) 370-3896 to book an inspection.
Why Waco Homes Are Different
Waco’s housing stock runs heavily toward 1910s-1950s wood-frame Craftsman and Tudor bungalows and 1950s-70s brick ranch homes. Plenty of those chimneys are original single-wythe brick with unlined or clay-tile flues that don’t meet modern clearances. On the outskirts, newer construction tends toward factory-built fireplaces with metal flues, which need a different inspection approach than masonry.
The climate does its own work on these chimneys. Central Texas summers bake the masonry, and periodic freezes – the 2021 winter storm being the sharp one – crack brick and dry out mortar joints. What we see more than snow load damage is thermal cycling and moisture intrusion. Add Waco’s clay soils, which shift foundations, and cracked crowns and deteriorated mortar joints become a steady repair driver rather than an occasional one.
Then there’s the long off-season. Between fires, creosote and debris accumulate unnoticed, spring brings nesting birds and squirrels into uncapped flues, and leaf litter settles into rarely-used chimneys. In older bungalows around Sanger-Heights and Dean Highland, we often find chimneys that were capped once and never re-sealed after roof work, letting rain in to rust dampers and spall brick.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Waco Services
Two jobs bring most Waco homeowners to us: a sweep before the burning season and a repair once the inspection finds something that won’t wait.
Chimney Sweep in Waco
A sweep here is as much about clearing what accumulated while the fireplace sat idle as it is about pre-season servicing. We remove leaf litter, bird nests, and creosote from the flue, then check the firebox and damper while we have access. In Waco’s older bungalows, the flue often hasn’t been touched in years, so the first visit tells you more about overall condition than any later one. For a full breakdown of what a chimney sweep involves here, start there. Call (866) 370-3896 to book a sweep.

Chimney Repair in Waco
Repair in Waco tends to mean masonry, not just fittings. Cracked crowns, deteriorated mortar joints, and rusted dampers from years of uncapped rain are the recurring calls. When a flue is unlined or its clay tile has failed, we reline rather than patch, using DuraFlex or HeatShield depending on what the flue can take. If you’re weighing a repair, our chimney repair page walks through the common jobs. Call (866) 370-3896 for a free estimate.

Chimney Inspection in Waco
An inspection in Waco has to account for a chimney’s age before it accounts for anything else. Many local flues were built unlined or with clay tile that has since cracked, and the mild winters mean problems sit quietly for years between fires. A proper Chimney Inspection tells you what’s actually inside the flue, not just what’s visible from the hearth.
Level 2 Chimney Inspection
Signs you need it
You’ve had a chimney fire, a freeze has cracked masonry, you’ve changed appliances, or you’re buying a Waco home and need documentation for insurance.
What it costs in Waco
Typical Level 2 inspections in Waco run $175-$450, depending on access and whether a camera is needed.
How we do it
We inspect every accessible part of the chimney and flue, including the attic, crawl space, and roof, and run a camera through the flue to record what we find.
Chimney Flue Inspection
Signs you need it
Smoke backs up into the room, the fireplace smells even when it’s not in use, or the flue has never been looked at since the house was built.
What it costs in Waco
A focused flue inspection typically runs $95-$250 in Waco.
How we do it
We run a camera down the flue to check for cracks, gaps, missing tile, and creosote buildup, and photograph anything that needs attention.
What Chimney Inspection Costs in Waco
| Item | Typical range in Waco |
|---|---|
| Basic visual inspection | $95-$175 |
| Level 2 inspection with camera | $175-$450 |
| Inspection with written report for insurance | $200-$500 |
Do I need a Level 2 inspection or is a visual check enough?
If your Waco home has had a chimney fire, a freeze, or a change of appliance, a Level 2 is the right call. A basic visual check covers routine annual upkeep. Call (866) 370-3896 for an exact quote – estimates are free.
What actually happens if I skip an inspection?
Creosote and cracked tile stay hidden until smoke backs up or a flue fire starts. In Waco’s older unlined flues, that risk builds quietly during the long off-season. Call (866) 370-3896 to book an inspection – estimates are free.
Brands We Service in Waco
We work with a defined roster of professional-grade products: DuraFlex and HeatShield for relining and flue resurfacing, Copperfield and Famco for caps and venting components, Olympia Chimney and Gelco alongside them. We don’t claim to stock parts locally, and we won’t substitute big-box materials. Turnaround depends on the part, and we’ll tell you the lead time upfront. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Waco, TX
| Service | Typical range in Waco |
|---|---|
| Chimney sweep | $150-$350 |
| Basic visual inspection | $95-$175 |
| Level 2 inspection with camera | $175-$450 |
| Inspection with written report | $200-$500 |
| Flue resurfacing (HeatShield) | $1,200-$3,500 |
| Full relining (DuraFlex) | $2,500-$6,500 |
| Crown repair | $350-$900 |
| Mortar joint repointing | $400-$1,200 |
| Chimney cap installation | $200-$550 |
| Damper replacement | $300-$800 |
In Waco, price climbs with height, roof access, and how much masonry has to come out – a failed clay-tile flue costs more to reline than a straightforward resurfacing. The written estimate sets the final price, and we don’t start work until you’ve agreed to it.
Neighborhoods We Serve in Waco
We work across Waco, from the older bungalow blocks to the ranch homes further out. The housing era changes what we find: pre-1940 flues in the central neighborhoods often show unlined fireboxes and never-lined chimneys, while the brick ranches tend toward capped-but-unsealed crowns. One note on response: scheduling is by booking, and we confirm your window when you call rather than promising a same-hour arrival for a whole area.
- Sanger-Heights
- Dean Highland
- Downtown Waco
- Woodway-adjacent west side
- Bellmead edge
Service Area – Cities Near Waco
Waco is the center of our work, and we also schedule visits in the surrounding communities. If you’re just outside the city, the conditions are much the same – older bungalows, brick ranches, and a long off-season between fires – so the inspection and repair approach carries over. We book Beverly Hills, TX, Bellmead, TX, Woodway, TX, and Hewitt, TX on the same schedule as Waco. Call (866) 370-3896 to confirm your address and book a window.
Serving Waco, TX – Our Local Coverage Area
We serve Waco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Waco
Yes, we schedule across Waco and the nearby cities listed above. Booking is by phone: call (866) 370-3896 and we’ll set a window. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repairs that change the structure – relining, crown rebuilds, masonry work – often need a permit from the city, while a sweep or inspection generally doesn’t. HOA rules vary by neighborhood. Ask your city’s building department before booking structural work, and we’ll tell you what category your job falls into.
We book by appointment rather than promising same-hour arrival. Call (866) 370-3896 and we’ll give you the next available window – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Whether it’s an inspection before the burning season, a sweep on a chimney that’s sat idle, or a repair after a freeze has cracked the crown, the first step is a free estimate. Call (866) 370-3896. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Waco Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Vaughn"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Daniela Salazar"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Lamont Nash