Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Waco
If your brick chimney is cracking, your damper won’t seal, or you’re seeing soot stains on the plaster around the firebox, we can help. We work on the older chimneys that make up so much of Waco’s housing stock, and we tell you exactly what your chimney needs and why before any work begins. Our technicians have up to 14 years of experience, and we handle sweeping, repair, and inspection under one roof so a Waco homeowner can finish a chimney issue start to finish with one specialist. Call (866) 370-3896 for a free estimate.
Why Waco Homeowners Call Chimney Sweep Waco for Chimney Repair
Waco chimneys age in a particular way, and that’s what we know best. The city’s housing stock leans heavily on 1910s to 1950s wood-frame Craftsman and Tudor bungalows plus 1950s to 70s brick ranch homes, many with original single-wythe brick chimneys and unlined or clay-tile flues that never met modern clearances. When we look at a Sanger-Heights or Dean Highland chimney, we’re usually looking at decades of use with almost no maintenance.
We use professional-grade product lines, not big-box substitutes: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That roster matters on a repair, because the liner or crown material going into your chimney is the part that has to last between visits. We’re also HeatShield-qualified for flue resurfacing, which means we can often restore a flue rather than replace it.
The other thing Waco homeowners tell us they value: we don’t recommend work you can’t verify. If we say a flue needs relining, you’ll see the camera footage of the cracked tile or deteriorated joint on screen first. Call (866) 370-3896 and we’ll schedule a look.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Waco
Chimney Liner Installation in Waco is usually recommended when a camera inspection shows cracked clay tiles, gaps at the joints, or an unlined flue that’s been venting a fireplace (and often a furnace or water heater) for decades. A proper liner brings the flue back to a known, sized, sealed path for smoke and exhaust. We size the liner to the appliance, install it in a stainless or cast-in-place system, and insulate where the clearance calls for it. A typical chimney liner installation in Waco runs roughly $1,800 to $4,500 depending on flue height, liner type, and whether the crown and cap need work at the same time.
Stainless Liners for Wood and Gas Appliances
DuraFlex stainless liners are what we reach for on most wood-burning and gas appliance relines. They’re sized to the appliance’s venting requirement, not picked off a shelf, and the fit is what keeps the system drafting correctly. Ask us to show you the sizing on your estimate.
Cast-in-Place Flue Resurfacing
When the existing flue is sound enough to resurface but not to leave bare, HeatShield cast-in-place resurfacing rebuilds the inner face of the flue without a full tear-out. It’s often the least invasive fix for an older Waco bungalow chimney. We’ll tell you plainly when resurfacing is enough and when it isn’t.
Chimney Flashing Repair in Waco
Chimney Flashing Repair in Waco comes up most on roofs where the original flashing has pulled away, rusted, or was never re-sealed after a roofing job. Flashing is the metal that seals the joint between the chimney and the roof, and when it fails, water gets into the masonry and the attic. We replace the flashing, cut a proper counter-flashing into the brick, and seal it with a method that lasts. A typical flashing repair in Waco runs about $350 to $850, with the range set by roof pitch, chimney size, and whether the brick chase needs patching where the old flashing sat.
Signs Your Flashing Has Failed
Look for rust streaks on the chimney’s exterior brick, water stains on the ceiling near the chase, or a gap you can see between the metal and the masonry. Rain intrusion often shows up first as spalled brick face or a rusted damper assembly. If you spot any of these, get it looked at before the next round of heavy rain.
Waterproofing After the Repair
Once the flashing is sound, a breathable masonry waterproofing on the brick helps keep the next decade of rain out. We don’t apply it over active leaks – the flashing has to be right first. Chimney waterproofing is one of the six repair services we handle alongside repointing, spalling brick repair, rebuilding, and tuckpointing.
Trusted Brands We Service in Waco
We work with a defined roster of professional-grade product lines, and we name them because the material going into your chimney is the part that matters most. DuraFlex and HeatShield handle liners and flue resurfacing. Gelco and Famco cover chimney caps, covers, and venting components. Olympia Chimney and Copperfield supply lines are the same sources professional chimney contractors nationwide rely on. We don’t carry parts on a truck or stocked inventory – the right component is ordered for your job, which keeps the fit and the material correct. If you want to know which brand goes into your repair and why, ask and we’ll walk you through it. Call (866) 370-3896 to schedule.
Common Chimney Repair Problems We See in Waco Homes
- Unlined or clay-tile flues in pre-1950 bungalows. These chimneys were built for a fireplace and nothing else, but many now vent a furnace or water heater too, which means cracked tiles and clearance violations that are invisible from the ground. A camera inspection is the only reliable way to see them.
- Cracked crowns from clay-soil movement. Waco’s expansive clay soils shift foundations, and that movement travels up to the chimney crown and mortar joints, opening cracks that let water in. The result is a rusted damper and spalling brick over time.
- Missing caps that were never re-sealed. Sweeps in Waco often find chimneys that were capped once and never re-sealed after roof work, or a cap that was pulled and never reinstalled. Rain intrusion then spalls the brick and erodes the smoke chamber.
- Thermal cycling cracks from freeze-thaw cycles. Waco’s humid subtropical climate, short mild winters, and periodic freezes crack masonry and dry out mortar. Spring also brings birds and squirrels into uncapped flues, and leaf litter and creosote build up through the long off-season between fires.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Waco, TX
Chimney repair in Waco isn’t one price, so here’s how the ranges fall. Mortar repointing on a typical chimney runs about $600 to $1,500. Spalling brick repair (replacing the face of deteriorated brick) runs about $500 to $1,200. Chimney waterproofing runs about $300 to $700. Chimney flashing repair runs about $350 to $850. Tuckpointing runs about $400 to $900. Chimney rebuilding, the big one, can run $4,000 to $15,000 or more if the chase has to be taken down and rebuilt. A chimney liner installation runs about $1,800 to $4,500. What moves the number: flue height, how far the damage reaches, and whether the crown and cap need work at the same time. The written estimate sets the final price, and estimates are free.
We Also Serve Cities Near Waco
We work across the surrounding area, not just inside the city limits. If you’re in Beverly Hills, Bellmead, Woodway, or Hewitt, the same professional-grade materials and the same camera-evidence approach apply to your chimney. Waco is our home base for the work, and the neighboring towns share the same older brick chimneys, clay soils, and freeze-thaw issues. Call (866) 370-3896 and we’ll schedule a free estimate.
Serving Waco, TX – Our Local Coverage Area
We serve Waco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Waco
You can, but an unlined flue venting a fireplace (and often a furnace or water heater) in a pre-1950 Waco bungalow has no safe path for exhaust and no clearance protection, which is how hidden hazards build up over decades. The honest answer is to get a camera inspection first. If the tiles are cracked or the flue is unlined, a liner is the standard fix, and a HeatShield or stainless liner often costs far less than a rebuild. Call (866) 370-3896 for a free estimate.
Your crown keeps cracking because Waco’s expansive clay soils shift the foundation under the chimney, and the crown moves with it; freeze-thaw cycles then widen the cracks. The fix isn’t a patch of mortar – it’s a rebuilt crown with the right slope and overhang so water sheds away from the chimney top. Call (866) 370-3896 and we’ll look at the crown and the whole chimney.
Look up at the chimney from the ground: if you can see straight down the flue, there’s no cap. Water stains on the interior plaster near the firebox, a rusted damper, or birds and squirrels in the flue are other signs. A proper cap and re-seal is a quick fix, and worth doing before the next storm. Call (866) 370-3896 for an estimate.
First-degree creosote is a light soot you can brush away. Third-degree creosote is a hardened, glazed, tar-like layer that a brush won’t remove and has to be treated or removed chemically or mechanically. The long off-season between fires in a rarely-used Waco fireplace lets creosote build up unnoticed, and it’s the glazed stage that raises fire risk. Call (866) 370-3896 and we’ll tell you which stage your flue has.
Yes, because the problems Waco chimneys develop – cracked crowns, failed flashing, missing caps, bird nests, and spalling brick – happen whether or not you’ve lit a fire. An annual inspection catches water intrusion and foundation-driven cracking before they spread. Call (866) 370-3896 and we’ll schedule a Level 2 camera inspection.
A Camera Check Before Any Upsell
Most of the repair work we see in Waco starts with something a homeowner can’t see from the ground: a cracked tile deep in an unlined flue, a crown that opened up over one winter, or flashing that failed years ago. We won’t recommend a liner, a rebuild, or any repair without camera footage you can watch on screen, and we’ll tell you when work can safely wait. Warm enough to be useful, specific enough to earn your trust. chimney repair is all we do, and Waco is where we do a lot of it. Call (866) 370-3896. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We serve Waco and the surrounding towns – Waco homeowners in Sanger-Heights and Dean Highland, and neighbors in Beverly Hills, Bellmead, Woodway, and Hewitt. Call (866) 370-3896 for a free estimate.
Written by the team at Chimney Sweep Waco.